高压转子 meaning in English
high-pressure spool
Examples
- The steady - state response of a counter - rotating dual - rotor structure with one inter - shaft bearing was analyzed , of which the low pressure rotor is coupled with the inter - shaft bearing ' s outer ring , and the high pressure rotor coupled with the inter - shaft bearing ' s inner ring
分析了一种具有中介轴承的反向旋转双转子结构的稳态响应，其中介轴承外圈与低压转子联接，内圈与高压转子联接。 - Abstract : based on the operation data , the cold start - up and warm start - up curves of a czecho 200 mw steam turbine are worked out according to the operation rules ; the fem calculating models of the temperature field and stress field of the high pressure rotor are established , and the suitable boundary conditions are given ; the temperature field and stress field of the high pressure rotor are calculated and analysized during these two working situation
文摘:在现场实测数据的基础上，根据运行规程拟定捷制200mw机组的冷态启动和温态启动曲线；建立高压转子温度场和应力场有限元计算模型，确定相应的边界条件；计算分析在这两种工况下高压转子的温度场和热应力场。 - Firstly , the performance is calculated at the design point of the ws - 9 aeroengine by using the numerical model established . secondly , after obtaining the performance coupling parameters , the steady - state performance of the non - designed points is caculated . third , respectively make the limitation of rotate speed of the high pressure rotor and low pressure rotor equal to corresponding parameters of designed point , after the data calculated compared with those of designed point and actual testing of the manufactory , the error is obtained
首先，用所建立的发动机数学模型计算了发动机在设计点的各项性能，第二，根据发动机各部件的耦合特性参数计算得到发动机在非设计点状态下的各项稳态性能，第三，分别设定限制高压转子转速和低压转子转速逼近设计点条件下对应的参数，将计算得到的性能数据与设计点性能进行了比较，并将非设计点的计算结果与生产试车过程实测的性能数据进行对比，给出了该稳态模型计算结果与实际试车数据的误差。