顶栓 meaning in English
ejector
Examples
- 7 , and the material contiguous surface as above the crest bolt , mix the indoor wall and turn son is etc . to all plate hard chrome , since bear corrosion , and then locate pure
7与物料接触的表面如上顶栓混炼室内壁转子等均镀硬铬，既耐腐蚀，又位于清扫物料，更换颜色确保色真。 - 5 , last bolt also in order to clip a set of structure , can also water cool off or the steam heat , bringing pressure through an air cylinder , the compulsive powder anticipates and the solid material is even to mix , exaltation produce efficiency
5上顶栓也为夹套结构，也可通水冷却或蒸汽加热，通过气缸施加压力，强制粉料和固体物料均匀混炼，提高生产效率。 - By analyzing and experimentally verifying the model , new ways of improving mixer performance were put forward . ( 1 ) heat water should be used in the mixer ' s temperature control to make the mixer work with optimal parameters . ( 2 ) the surface materials of the mixing chamber and rotors should be chosen rationally to change material surface energy and increase friction on them . ( 3 ) when the compound was processed under higher pressure of floating weight , shallow groovers or stripes parallel to the axle of the rotor should be made on the mixing chamber internal wall to increase the real contact area and improve mixing effect
通过对模型的分析和实验验证，提出了提高密炼机混炼效果的新途径： ( 1 )密炼机温度控制采用温水冷却，使密炼机处于最佳工作状态； ( 2 )通过合理选择密炼室和转子表面材料以改变材料表面能来增大胶料与它们之间的摩擦力； ( 3 )在上顶栓压力较大的条件下，在密炼室内壁与转子轴线同方向加工浅的光滑槽可明显改善混炼效果。