静压分布 meaning in English
static-pressure distribution
Examples
- Formula of static pressure distribution parameters for calculating the static pressure distribution in distributing headers of utility boiler
电站锅炉分配集箱静压分布参数的确定 - Radial distribution of the static pressure at stator surface was measured in a rotor - stator disk cavity with centric inflow and two outflows
摘要中心进气具有两个出口的旋转盘系统中静盘表面沿半径方向的静压分布由实验方法获得。 - The computational results given by s2df under the same conditions of experiments agree well with the experiments data not only the static pressure distribution but also the position of shock
计算的结果不论从叶表静压分布还是激波的位置，与实验的结果都相吻合。这表明了s2df程序气动计算的可靠性。 - The influences of the inlet tube angle , backpressure and driving jet velocity on static pressure distribution in the gas - solid injector are calculated , and the effects of the inlet tube angle on particle bulk phase concentration and axial mean speed of particles in the gas - solid injector are analyzed firstly . the predicament caused by lack of measuring means on the particle velocity in experiments is solved
分析了收缩角、背压和气体喷嘴出口速度对气固喷射器内静压分布的影响，以及收缩角对气固喷射器内固体颗粒体积浓度场和颗粒平均速度的影响，解决了喷射器内固体颗粒速度试验测试手段缺乏的困境。 - The experimental results show that the distribution of the radial static pressure behind the model cascade can be controlled by changing the diameter , number and distribution of the holes at different radius of the full circled backboard with the holes properly ， and the experiments variable enthalpy drop in the model cascade can be realized by using out - circled backboard or in - circled backboard which are set on the different distances from the trailing edge of the model cascade
实验结果表明，适当选择全环钻孔挡板不同半径处的钻孔率、钻孔直径与分布，可调节静叶后径向静压分布，采用外环或内环挡板，并将其分别置于静叶的近、中、远下游，可实现静叶栅的变焓降实验。