进给率 meaning in English
feed rate
feedrates
Examples
- Test conditions for machining centres - part 6 : accuracy of feeds , speeds and interpolations
加工中心检验条件第6部分：进给率速度和插补精度检验 - Usually , volumetric models or vector force models used for optimization of feedrate must be created to get the variable feedrate along the tool path
通常必须创建切削体积模型或矢量力模型来优化刀具路径各段的进给率。 - Since there is a lack of scientific tools in practical process planning stages , feedrates of nc machining are selected based on previous experiences
由于加工参数缺乏科学的选择工具，数控加工的进给率常根据加工经验设定。 - The model is tested by a typical die - cavity roughing , and shortening machining time and balancing cutting - load can be attained
通过典型模具型腔的粗加工试验验证，证明该进给率优化策略不仅可以缩短加工时间，而且可以使加工载荷均匀。 - Considering the die - cavity roughing being a 2 . 5d cutting , a novel cutting force surface model is created based on orthogonal cutting tests
鉴于模具型腔粗加工常采用2 . 5维加工，提出一种通过正交切削试验建立切削力曲面模型用于模具型腔粗加工进给率优选的新策略。