进样口 meaning in English
injection port
Examples
- If using a split / splitless inlet , check that the purge valve is on
如果使用分流/不分流进样口，检查分流阀是否打开。 - Clean the injector port , replace critical injection port seals , replace injection port liners , and change septa as needed
清洗进样口，如有必要，更换密封垫，衬管，隔垫。 - Adding an optional heating attachment enables you to maintain preheated samples at temperatures up to 80 c . this allows you to fill samples which are highly viscous at ambient temperature
选配一台进样口加热装置，则可保持预热样品的温度在80 c ，这使得高粘度样品在室温条件下就能顺利进样。 - Under this condition , the linear range , the limits of detection , the recoveries , the relative standard deviations of the method to every component have been carried on
进样口温度220 ，检测器温度250 。在此条件下，对各组分进行了方法的线性范围及检测限，方法的准确度，方法的精密度测定。 - The electric field distribution at the cross is simulated and analyzing using the soft of ansys5 . 7 . then the electrophoretic method has been optimized . the electrophoresis and the volume of injection have been significantly controlled using this method
设计了微通道电泳芯片的电泳操作方法，并用有限元分析软件对在进样和分离条件下，进样口处的电场强度分布进行了模拟分析，在此基础上对电泳操作方法进行了优化，实现了进样量和电泳过程的有效控制； 6