表面处理剂 meaning in English
lta-5
surface treating agent
yf-11
Examples
- Surface treating agent
表面处理剂 - Research on modification of titanium dioxide by non - ionic surfactant cooperating with hyperdispersant in aqueous medium
多种表面处理剂协同作用改善颜料级钛白水分散性研究 - The inserting method and properties of the composite materials in consist of omt and poly ( styrene - butyl acrylate ) had been researched ; the ultra - fine organic rigid particles crosslinked polystyrene ( xps ) has been synthesized by emulsion polymerization , the effect of the synthesis process on the size of organic rigid particles was discussed . the cause of the increasing mechanical properties of pp composite materials , which were strengthened and toughened with organic rigid particles and elastomer , had been investigated . the results of studying viscosity and precipitate height of sio2 nano - particles suspension showed that the sio2 nano - particles are very good dispersed by dp270 or cat 639w dispersant
通过粘度法和沉降法测定结果的一致性，说明分散剂dp270和cat639w对sio _ 2纳米粒子有较好的分散性， dp270的最佳用量为0 . 2时悬浮液粘度从35 . 1mpa ? s降为23 . 3mpa ? s ， cat639w最佳用量为0 . 4时悬浮液的粘度从35 . 1mpa ? s降为23 . 1mpa ? s ；通过研究分散剂存在下纳米粒子的苯丙乳液聚合动力学，发现纳米粒子的存在对乳液聚合有一定的缓聚作用，并讨论了乳化体系、温度、引发剂、表面处理剂以及纳米粒子用量对聚合的影响。 - All those series of surface treating agents are widely used in manufacturing cars , tractors , motorcycles , bicycles , building machines , transformers , transducers , and mechanical and electrical appliances - before the finishing of these products . they are also used in drawing of steel wires and tubes , in cold rolling and acid pickling of steel articles
本公司生产制造金属表面处理剂的系列产品除油剂除锈剂表调剂磷化剂铝合金清洗及氧化剂等，该系列产品广泛用于汽车行业拖拉机行业摩托车自行车工程机械变压器换热器机电产品家用电器及其他机械产品的涂装前处理，钢丝钢管的拉拔钢铁冷轧酸洗等。 - In addition , a new analytical method was used to solve the shear strength of the fiber / epoxy interface . the result showed good agreement with that from the kelly - tyson equation . meanwhile , according to the sfc tests of the single fiber reinforced epoxy matrix composites treated by four types of surface treatments , the interfacial adhesion conditions were estimated by critical fiber length , interfacial shear strength and single fiber microdamge mode
此外，文中对单纤维复合材料断裂实验运用了新的解析方法，求解了玻璃纤维环氧复合材料界面的剪切强度，与kelly - tyson等式方法求得的界面剪切强度有着很好的一致性；同时，对四种不同表面处理剂处理的单纤维复合材料断裂实验进行了分析，从临界纤维长度、界面剪切强度和单纤维断裂实验中纤维断点周围基体形貌评价了界面的粘结情况。