维热 meaning in English
viged
vigee
viger
wieger
Examples
- An analysis of infrared response character of the thin - film pyroelectric detector
在热释电薄膜红外探测器二维热分析中的应用 - After a lot of survey and careful design work , a one - dimensional test system with multi - function such as air stage and fuel reburning is built up
本文经过大量的调研和仔细的设计、完善，建成了具有空气分级、燃料再燃等多种用途的一维热态试验系统。 - The effects of ssc ( small - scale sub - lithospheric convection ) on seafloor topography are investigated by formulating a 2d thermal convection model that is parallel to plate motion
摘要根据建立的垂直于大洋中脊的二维热对流有限元数值模型，采用常粘性以及与温度相关的粘性两种粘性结构对小尺度地幔对流对海底地形的影响进行了重新研究。 - Abstract : thermally induced stress and the relevant warpage cause by inappropriate mold design and processing conditions are problems that confounded the overall success of injection molding . a thermorheologically simple thermoviscoelastic two - dimension material model is used to simulate the residual stress and warpage within injection molded parts generated during the cooling stage of the injection molding cycle . the initial temperature field corresponds to the end of the filling stage . the fully time - dependent algorithm is based on the calculation of the elastic response at every time step . numerical results are discussed with respect to temperature and pressure
文摘:不均匀的热残余应力及其变形是注塑成型加工中常见的工程问题之一.应用热流变简单材料的二维热粘弹本构方程得到的递推公式，数值模拟了成型中的热残余应力及其翘曲变形，并用数值实验讨论了温度、压力对注塑件残余应力及变形的影响，发现温度变化不均匀是注塑件翘曲变形的最主要原因，其影响远大于压力的作用，与工程实验的结论一致 - Associated tightly with the stokes measured in small capacity current breaking and short - circuit breaking test duty t100a ( short arc , middle arc and long arc ) , the electric field distributions 3 ms after current zero have been calculated . the cold gas flow field corresponding with small capacity current breaking is calculated . based on the results derived from one - dimensioned gas flow field simulation , the two - dimensioned gas flow fields corresponding with short - circuit breaking test duty t100a ( short arc and middle arc ) are calculated as well
本文采用与试验紧密结合的方法，在给定机械行程曲线的基础上对三峡工程中采用的550kvsf6断路器在开断小电容电流、短路开断方式5短、中、长燃弧电流过零后3ms内灭弧室二维静电场分布进行了分析计算；对该断路器开断小电容电流时近似的冷态场进行了二维仿真分析计算；在对短路开断方式5短、中、长燃弧一维气流场进行分析计算的基础上进一步采用一维气流场和二维气流场相结合的方法，对该断路器开断方式5短燃弧和中燃弧对应的二维热态场进行了分析计算。