终止位 meaning in English
bit stop
stobit
Examples
- Communication frames begin with a start bit and end with a stop bit
串口通讯以起始位开始，以终止位结束。 - The start bit of a character is placed in the space level , and the stop bit the mark level
我们将字符的起始位设置成空号电平，而将字符的终止位设置成信号电平。 - Using 3 ' race the transcription stop site mapped 27nt downstream of the putative translation stop codon
3 ’ race分析结果表明转录的终止位点在翻译终止密码子下游的27个碱基处。 - Receiver and transmitter devices must have the same word length , the same parity and the same number of stop bits
接受方和发送方必须具有相同的帧长相同的校验方式，和相同的终止位。 - Using an 8 - depth async fifo solves the synchronization and exchange of data be - tween different clock domains . the data transaction protocol comes from the most basic work way of uart . when the master clock is 16 . 7mhz , the pcm side and adpcm side clocks both are 2 . 38mhz , the results of simulation show that the latency from the start - bit of pcm data inputting uart receiver to the stop - bit of adpcm data outputted uart transmitter is 14 . 3 us and the latency from the start - bit of adpcm data inputting uart receiver to the stop - bit of pcm data outputted uart transmitter is 14 . 7 us
在主时钟为16 . 7mhz ， pcm数据端与adpcm数据端时钟均为2 . 38mhz时，模拟结果表明从pcm的起始位输入uart接收器到adpcm终止位输出uart发送器的最大延迟为14 . 3 s ，从adpcm的起始位输入uart的接收器到pcm终止位输出uart发送器的最大延迟为14 . 7 s ，设计时尽可能的使编码与解码的时间相差不多，从结果看出基本达到这个要求。