粘接层 meaning in English
adhesive linkage
bonding layer
Examples
- A portal is the glue layer for many diverse it projects
门户是许多不同it项目的粘接层。 - Behavior of stitched uniweave t300 qy9512 laminates with a hole under in - plane tension
粘接层对各向异性层合阻尼结构内耗特性的影响 - However , the die attach layer delaminated after 500 cycles and pcb cracked in the underfilled samples after long time cycling . c - sam is employed to investigate the delamination in the underfilled samples . highly concentrated stress - strain induced by the cte mismatch between the bga component and the pcb board , coarsened grain and two kinds of intermetallic compounds ( nisn / nisns ) which formed during reflow and thermal cycle and their impact on the reliability of solder joints are discussed in this paper
充胶样品粗化尤为严重； ? ni - sn金属间化合物包括两层：其中，靠近ni焊盘的那层比较平整，同时， eds结果分析表明其化学式近似为nisn ，而靠近焊料的那层呈板条状，化学式近似为nisn _ 3 ，文献表明其为亚稳相； ?充胶使得样品最大应力范围降了接近一个数量级并降低了dnp的作用，同时，器件失效模式变为芯片粘接层分层； ? c - sam结果表明本论文采用的充胶样品，芯片粘接层分层起始于500周左右，而经过2700周循环的样品，分层几乎扩展到整个界面。 - Some popularly concerned hot problems and fast developed techniques in present nondestructive testing field were introduced , such as on - line monitoring for pipe laying , gas pipeline and embedding pipes , inspection for the adhesive coating of composite material , imaging techniques and signal processing
摘要介绍当前无损检测领域几项快速发展的并受人普遍关注的热点问题和技术，如输油、输气管道和地下管网的在线监测、复合材料粘接层的检测、成像技术以及信号处理。