符合试验 meaning in English
pass test
Examples
- The calculating example indicates that it can accord with test result preferably using this model
所附算例表明，使用该模型能较好符合试验结果。 - The results showed that the model fit in with the test data well , having certain practical values
结果显示模型能较好的符合试验数据，具有一定的实用价值。 - Based on the analysis about the test requirements and the saturated magnetization of the armor plate , the excitation magnetic circuit satisfying the testing condition and a validation system are designed . because the geometric , of the magnetic leakage at the direction of the normal of the roundness fault has the feature of two peaks : a positive and a negative , using the linear regression and the software matlab , two regression equation are proposed : one is about the peak value of the magnetic leakage and the diameter and depth of the roundness fault ; the other is the distance between the two peaks and the diameter of the roundness fault . the result of the validation system proves that the two equations are valid , and an applied method using for quantificationally inspecting the roundness faults is proposed according to the two equations
根据实验要求，通过对钢板达到饱和磁化的必要性进行的分析，设计了符合试验条件的励磁磁路，并设计了一套实验验证系统；根据圆形缺陷法线分量漏磁场几何图形正负双峰值的特点，采用线性回归拟合的原理和matlab软件及其统计工具箱中的相关函数，给出了圆形缺陷漏磁场几何图形的峰峰值与圆形缺陷的直径和深度以及峰峰值间距与圆形缺陷直径的两个回归拟合方程，并通过实验验证系统验证了拟合方程的正确性，利用这两个简单实用的拟合方程，提出了一种工程定量检测圆形缺陷的应用方案。 - As to the experimental study , a test system was designed firstly , which include propellant feed system , cooling system , controlling system and measure system . secondly , a test engine was designed according to the experimental requirement . on this basis , experiments under different working conditions were done , and the results of them were analyzed , which showed the combustion efficiency and stability
实验方面，首先设计了针对三组元发动机推力室工作过程进行试验的试验系统，包括推进剂供应系统与冷却水供应系统、控制系统以及压力、温度、流量的测量采集系统；其次，设计出符合试验要求的缩尺发动机；最后针对所设计的试验系统和发动机，进行了不同工况的试验，对所得数据进行了分析处理，得到了不同工况下燃烧效率和燃烧稳定性特性。 - By making some assumptions , collision frequency were presented . then the the flocculation kinetics model was established through population balance equation . comparison of experimental data and modeling results indicate that there are the same trend between the two . so the model can predict floes number and size during flocculation of yellow river ' s loess particles without using empirical parameters . the tem and sem were used to obsever floes in the study of floe structure . the flocculation was divided as flocculi , floc and floe aggregate . the floes structure model was established by assumption that particles position in floe accords with tetrahedron . the fractal dimension of model and experimental floes was found to be coincidentso the model can reflect the structure of flocs formed in flocculation of yellow river ' s loess particles by macromolecule flocculant at a certain extent
最后，本文还对絮凝动力学和絮体结构进行了研究，在前人研究的基础上，针对高分子絮凝黄河泥沙，对絮凝过程作了一些符合试验条件的假设，建立了颗粒碰撞频率表达式，应用了颗粒数量平衡方程，从而建立了絮凝过程的动力学生长模型，模型计算结果与试验数据对比表明，二者趋势一致，在没有使用经验参数的情况下基本上能够描述黄河泥沙絮凝过程中絮体数量和尺寸分布的变化过程；对絮体结构的研究中，应用扫描电子显微镜和透射电子显微镜对絮体进行了观察，将絮体分为絮粒、絮团和絮网三个不同的生长阶段，通过假设颗粒结合位置符西安建筑科技大学博士学位论文合正四面体，建立了絮体结构模型，计算得到的模型絮体分形维数基本与试验中的实际絮体相符，在一定程度上能够反映高分子絮凝黄河泥沙生成的絮体结构。