热压温度 meaning in English
hot pressing temperature
Examples
- Effect of hot - pressing temperature and natural curing time on properties of fast - curing cement particle board
热压温度和养护时间对快速固化水泥刨花板性能的影响 - Effects of four main factors , i . e . hot presaing temperature and time , steam injection time and glue spread quantities on lvl properties were determined
研究了热压温度、热压时间、喷蒸时间和涂胶量对单板层积材性能的影响。 - Compared with the htped beryllium material with the same particle size , the hot - pressed beryllium material has lower mys , . value because its higher consolidation temperature will cause grains to grow
在用相同粒度粉末成形固结时，由于热压温度较高，晶粒有所长大，因此，热压铍材_ ( mys )较静压铍材低。 - Results showed that temperatures have different effects on the curing speed of resin , the rate of moisture transmission , the degree of plastic melting and the degree of wheat straw decomposition
结果表明，热压温度对板坯中胶黏剂的固化速度、水分传递速度、塑料熔融程度、麦秸分解程度等都有不同程度的影响。 - Under the same conditions of hot - pressing time , composite density , pe ratio , and resin content , the optimum properties of the composites can be obtained when hot - pressing temperature is 190 degrees c
当在热压时间、聚乙烯比例、施胶量、复合材料密度相同的条件下，热压温度为190时压制出的麦秸聚乙烯复合板材各项物理力学性能较好。