烧结工序 meaning in English
sintering circuit
Examples
- The task come from a magnetism material factory , their plant needs to reconstruct . the plant is used in working procedure that sinters magnetism material
本课题来自材料厂的设备改造，该设备用于磁性材料的烧结工序，该工序对烧结过程的温度稳定性要求较高。 - Abstract : the reasons of higher energy consumption of sintering plant in tssc 2 ironmaking plant was analyzed . the direction of energy saving and some measurements were proposed
文摘:分析了唐钢二炼铁厂烧结工序能耗高的原因,结合国内外先进的烧结节能技术,从烧结工艺的各个方面提出了节能的方向和措施。 - Cleaning the sample judge as scrap and recycle which exceed save limit time by lab leader , recycle block sample return to sintering process for demagnetization , re - inspection according to normal process after complete , the scrap deliver to production warehouse supervisor handing and fill in “ sample disposal form ”
判定为报废的和超出保留期限的回用品由实验室组长安排人员对样品进行清理，回用的块状样品退回给烧结工序，进行退磁处理，完成后按正常程序重新报检，废品交送生产车间废品库管理人员，办理交接手续需填写“样品处置单” 。 - Abstract : in this paper , two tests are described on air leakage of sinter machine in 2 sintering plant of xiangtan iron and steel co . according to the test results , on the base of analysis and discussion , a series of measures on decreasing air leakage of sinter machine are putted forwored from sealed devices , lubricating oil system , maintenance and management etc . an effective and feasible way is supplied for energy saving and increasing production , decreasding production cost , increasing economy benefit of sintering process
文摘:通过对湘钢二烧烧结机漏风率的两次测试和结果分析,从密封装置、润滑系统、附件结构的改进等方面提出了一系列降低漏风率的对策，为烧结工序的增产节能，降低生产成本，提高经济效益提供了一条行之有效的途径。 - The laboratory group leader shall assign a person to clear recycling samples that are judged as cancelled or out of the storage life ; recycling piece samples shall be returned to the sintering procedure , demagnetized , and then after completion , reported for inspection according to the regular program ; any waste samples shall be sent to the keeper of the waste warehouse of the production workshop , and relevant delivery procedures need be handled by filling in the " form for disposal of samples "
判定为报废的和超出保留期限的回用品由实验室组长安排人员对样品进行清理，回用的块状样品退回给烧结工序，进行退磁处理，完成后按正常程序重新报检，废品交送生产车间废品库管理人员，办理交接手续需填写“样品处置单” 。