烧料 meaning in English
clouded or frosted imitation glass
Examples
- The silo next to clinker silo will be used for storing under - burnt clinker , which is called as under specification clinker silo
孰料库旁边的那个库是用来储存生烧料的，我们叫它黄料库。 - Cdq series coal gas producer outlet spawning , lined set help water , stove inner every arrangement of ideas saturated temperature , upper material , get rid of grey system equal device voluntarily move round process middle , hooverize clouded or frosted imitation glass , safe reliable , operation convenient
Cdq系列煤气发生炉出口放散夹套补水炉内各层次饱和温度上料除灰系统均可装置自动运转过程中，可节约烧料，安全可靠，操作方便。 - Meanwhile , based on the magnetic material theory , a complete analysis and summary are carried out on the three crystal structure and technology theory ; especially the ingredient analysis is made on the microscopical morphology and x - ray diffraction and its mixtures existence and relevant metallurgy about the typical second resource such as coldrolling iron and oxide red , steelmaking sludge and feso4 based on the practeal investigation of the pre - burning materials in domestic products plant , especially the analysis on the domestic markets and components , and connecting with reality and material characters in panzhihua iron and steel ( group ) cmpany , we established the product orientation and developing direction in panzhihua iron and steel ( group ) company ; after carrying out the technology reform on the old no . 1 magnetic product plant of enterprise company , making a detailed study on the various conditions for establishing a plant , the feasible research report is formed of 1400 tons ( per year ) feo preburning material and 3000 tons ( per year ) middle and high quality magnetic products ; so a necessary and reliable supports are provided both theoretically and practically for the development of the magnetic industry in panzhihua iron and s teel ( group ) cmpany
同时，对磁性材料的理论基础，尖晶石、磁铅石、石榴石三大晶系结构以及其工工艺理论进行了较为全面的归纳、分析和总结；尤其针对攀钢产生的二次资源如冷轧铁红、炼钢污泥、硫酸亚铁等三种典型原料分别作了成分分析、微观物理形态以及x光衍射分析、其夹杂物的存在形式及相应的金相分析。对国内铁氧体磁性材料的预烧料及磁件生产厂家的工艺、设备、技术、成本、质量状况进行了实地的调研，特别是对国内磁性材料的市场及竞争对手进行了详尽的分析，在此基础上，结合攀钢实际及原料特点确立了攀钢发展磁材产业的产品定位及发展方向；对企业公司原有磁件一厂进行了技术工艺改造，对建厂各项条件进行了详细的分析，形成了了年产14000吨年铁氧体预烧料以及3000吨年中高档磁件产品的可行性研究报告，从理论上和实践上为攀钢磁性产业的发展提供了必要的可靠的依据。 - On the base of the analysis on the advanced technology of hard ferrite in foreign country , the main procedures of preparing hard ferrite pre - sintering material are determined as follows : first , the ferrite oxides coming from the main cold rolling line and strontium carbonate are conveyed to storage tank by gas power and weighed automatically according to the demands of constituent composition . and then they are mixed and grinded by using method of wet treatment . finally the mixtures is transported to the devices of storage by transporting pump
在分析国外先进的永磁铁氧体生产工艺的基础上，确定了生产高档永磁铁氧体预烧料的主要过程：首先，利用攀钢冷轧铁红为主要原料，将氧化铁红及碳酸锶采用气力输送至贮料料仓，经自动称量装置，按工艺配方称量后分别由氧化铁红及碳酸锶发送罐气力输送进入预混搅拌筒加水搅拌，然后再送入混磨机湿法混磨；最后，混合物经输送泵输送至料浆存储装置，经定量进料泵定量输送至回转窑进行湿法预烧，预烧料经缓冷至室温后，再球磨。 - The research work in this paper was carried out at the second power factory of xici subsidiary . the production technology of strontium ferrite was studied and wet process of strontium ferrite pre - sintering material with anisotropic characteristic was determined . products of y30h - 2 which meet the standard series of sj / t10410 - 1993 were selected to be experimental products
本文以西磁分公司料粉二厂为基点，研究了锶永磁铁氧体生产的工艺技术路线，确定了湿法工艺生产各向异性锶永磁铁氧体预烧料，并将试验产品定位在sj t10410 - 1993标准中的y30h - 2产品。