添加合金 meaning in English
alloy addition
alloying addition
Examples
- Technologies were then developed including using of zinc alloy , such as zn - mn , zn - mg and zn - ni alloy baths , and high temperature hot dipping process
为此，国外发展了多种热镀锌技术，包括在锌浴中添加合金元素的多元合金、锌锰合金、锌镁合金和锌镍合金热镀锌技术及高温镀锌技术。 - Finally this thesis discussed the tendency of manganese content influencing the wear resistance and pointed the contribution to wear resistance of alloy element in 28cr cast iron and gave the range of proposition manganese content
最后本文讨论了含锰量对耐磨性影响的趋势，指出了添加合金元素对28cr铸铁耐磨性的贡献，给出了建议含锰量范围。 - Mixing alloy elements of ni , mo , w in fe - c - cu alloy , the sintered steel was prepared . the microstructure and wear resistance properties of the sintered steel had been studied . the influence of heat - treated technology and the alloy elements on the microstructure and the wear resistance had been studied and analyzed
以fe - c - cu合金为基粉，添加合金元素ni 、 mo 、 w制备烧结钢，并对试样进行了微观组织和耐磨性分析，系统地研究了热处理工艺及合金元素镍、钼、钨的复合添加对烧结钢组织和耐磨性的影响。 - In regard to the low wear resistance of the white iron shot in the practical application , based on experimental research and trial production , by alloying and proper heat treatment , the shot can be made with higher hardness , better toughness and increased service life
摘要针对白口铁丸在实际应用过程中不耐磨的现象，通过大量实验研究和试生产，找到通过添加合金元素生产合金铁丸，并通过适当热处理等手段，使其既具有较高硬度，又有良好的韧性，使用寿命得到提高，满足抛丸工作的需要，节约大量资金，提高了劳动生产率。 - Results of the experiments showed that the wear mechanisms of the sintered steel included abrasive wear , adhesive wear and fatigue wear , and it was the abrasive wear most important . it was the sintered steel mixed by ni , mo that was the best on the wear resistance , because of the great lot of bainite ; the sintered steel quenched and low temperature tempered mixed by mo , w that was the best on the wear resistance , because of the rigidity of the steel was the highest
实验结果表明：本文中几种烧结钢的磨损机制均是由磨粒磨损、粘着磨损、和疲劳磨损共同作用的，且以磨粒磨损为主；在烧结态下，复合添加合金元素镍、钼的烧结钢的耐磨性能最好，这是因为生成了大量的硬质相贝氏体；而淬火、低温回火态下，则复合添加钼、钨的烧结钢的耐磨性能最好，这是因为热处理态下添加钼、钨的烧结钢的硬度最高。