×

沥青磨耗层 meaning in English

asphalt wearing course
asphaltic wearing course
bituminous wearing coat

Examples

  1. The grade composite , road performance and its mechanism are systemically studied . 1 ) the aggregate grade of ogfc is studied through the volume method base on the analysis of the aggregate grades . then the grade is verified and the relation between the grade and pore rate is studied statistically , the typical grades of ogfc are developed ; 2 ) the reasonable pore rate of ogfc is studied on the basis of the balance of mechanics and function performance ; 3 ) the mineral fiber is added to the ogfc mixes to increase asphalt content , thus the anti - water performance of ogfc mixes are improved ; 4 ) high viscous asphalt fit for the preparation of ogfc is prepared through composite modification by sbs and rubber powder ; 5 ) the mechanics mechanism of ogfc is studied in the paper , it shows : asphalt paste , as well as the coarse aggregate skeleton , is essential to the mechanics of ogfc
    在分析各国ogfc级配的基础上,运用矿料体积法进行ogfc级配设计,用正交实验对矿料级配进行了优化设计,运用数理统计方法分析矿料级配和孔隙率之间的关系,并回归出矿料关键筛孔通过率与ogfc骨架空隙结构关系的数学方程,进而提出了ogfc的合理级配;通过对不同孔隙率典型级配混合料的性能研究,综合力学和功能性能,得出了ogfc的合理孔隙率范围:针对高速公路面层对ogfc力学性能方面的要求,本文从沥青胶结材料、纤维稳定剂两方面对ogfc的性能进行改善:通过sbs和橡胶粉复合改性的方法开发出了适合ogfc的高粘度改性沥青,掺加聚合物纤维,提高ogfc的最佳沥青用量,进而改善了混合料的高温性能和抗水损害性能,优化设计出能满足高速公路路用性能,车辙动稳定度达5000次/ mm以上,动融劈裂强度比90 ,透水系数31ml / s ,并具有防滑降噪功能的开级配沥青磨耗层( ogfc )混合料。
  2. Open graded friction courses ( ogfc ) is a kind of open graded porous asphalt mix designed to drain water on the road face when raining . it has good performance on draining , anti - slide and noise reducing . it is common used in foreign countries from 1980s , while the lack in china because its poor mechanics performance , due to the high pore rate , cannot fit for the heavy traffic load in china
    开级配沥青磨耗层( ogfc )是一种具有相互连通空隙的开级配混合料,具有优良的排水、防滑、降噪等功能,然而该种混合料空隙率达15以上,沥青用量低,混合料的耐久性和强度会产生一定影响,由于我国高速公路重载、超载严重,按国外设计方法设计的ogfc混合料难以满足路用性能的要求,因此, ogfc在我国高等级公路建设中一直没有得到推行。

Related Words

  1. 磨耗等级
  2. 磨耗条款
  3. 波浪磨耗
  4. 磨耗周期
  5. 冲击磨耗
  6. 合理磨耗
  7. 磨耗纹
  8. 生物磨耗
  9. 磨耗程度
  10. 磨耗指数
  11. 沥青苗
  12. 沥青膜
  13. 沥青末沉着病
  14. 沥青末肺
PC Version

Copyright © 2018 WordTech Co.