氧化温度 meaning in English
oxidation temperature
oxidizing temperature
Examples
- Lodometry method was used to measure the content of the hydroperoxide groups on the membrane surface
采用碘量法测定了plla膜表面大分子过氧化氢基团的浓度，并考察了氧化时间和氧化温度的影响。 - The starting oxidation temperature of copper powders prepared by hydrothermal method is about 210 and average particle size is about 0 . 7 m
采用此参数可得到平均粒度为0 . 7 m ,分布狭窄,开始氧化温度约为210的超细铜粉。 - Anti - oxidation temperature of diamond with 500 ppm boron reached 1070 specific resistance of diamond with 2158 ppm boron was 1 . 93 cm
含硼500ppm的金刚石抗氧化温度提高到1070 。当含硼量为2158ppm时金刚石的电阻率为1 . 93 ? cm 。 - The content of the hydroperoxide groups on the photooxidized plla membrane surface increased initially and then decreased with the photooxidization time
随氧化时间延长，大分子过氧化氢基团的浓度先升后降。氧化温度升高能够加快氧化过程的进行。 - The model of primary battery theory was built to explain the mechanism of improving uniformity of copper powders . as the two different particles closing up , primary battery reaction happened because of the
使原来存在大量扭折、台阶等缺陷的铜晶得到晶格修补,使晶格完美化生长,从而一定程度上提高了其抗氧化温度。