×

杂质相 meaning in English

impurity phases

Examples

  1. The results of oxidation resistance test showed that additive of aluminum could increase the purity of samples and reduce the presence of secondary phase
    氧化增重实验的结果表明:在起始原料中掺加al粉有助于提高所合成材料的ti3sicz纯度,减少杂质相的生成。
  2. Dsc , xrd , and edx analysis were adopted to explore the solid - state reaction processing parameters . the results showed that zrnisn - based compounds were synthesized at 1173k with holding for 96 ~ 168hrs , which were also under high purity ar shielding
    结果表明:通过固相反应, zrnisn基化合物可以在高纯ar气保护下于1173k保温96 168小时获得:各种组分的产物晶型完整且无杂质相出现。
  3. Wetting between reinforcement sicp and the molten metal is often poor when it is blow 1000 ' c ; 2 . during the processing , many phases of the interfacial reaction products have negative influence on the properties of the produced composites
    Sic颗粒增强复合材料中界面反应生成的有害杂质相较多,对复合材料的性能的影响较大。可以通过添加mg 、 li等活泼的合金元素,对增强体颗粒进行表面预处理来改善润湿性。
  4. In the section of non - pressing sintered , the influence of different raw material system and sintered temperature on the phase composition of the material were studied . and two conclusions were achieved . the one is that it is good for phase composition design and control because the final phase composition of the material fabricated by ti , sic and c raw material system is comparatively stable
    在无压烧结阶段,研究了原料体系与工艺制度对材料物相组成的影响,结果表明使用ti 、 sic 、 c的原料体系得到的材料最终物相组成比较稳定,有利于进行材料组成设计与控制; 1500得到的材料中的杂质相含量较少,是比较合适的反应温度。

Related Words

  1. 杂质极限
  2. 杂质线
  3. 固体杂质
  4. 挥发性杂质
  5. 游离杂质
  6. 金属杂质
  7. 杂质缺陷
  8. 杂质光谱
  9. 杂质粒子
  10. 杂质土
  11. 杂质限度
  12. 杂质线
  13. 杂质型
  14. 杂质循环量
PC Version

Copyright © 2018 WordTech Co.