最大拉应力 meaning in English
maximum tension stress
Examples
- The maximal tension stresses in surface and base between induced crack have been obtained by parametric analysis
通过结构参数分析掌握了预切缝间面层、基层中最大拉应力的分布规律。 - The maximum draw stress located on the lingual apex , while the maximum compressive stress located on the lingual crest of the ridge
最大拉应力位于舌侧根尖部，最大压应力位于舌侧牙槽嵴顶。 - Then , taking the maximal tension stress in surface and base and the stress intensity factor at the top of the induced crack as restraining indexes , method to determine the reasonable induced spacing has been determined
然后以预切缝上端应力强度因子、面层与基层内的最大拉应力为约束指标建立了合理预切缝间距的确定方法。 - The models of analyzing temperature and structure are established . temperature increment and deformation are discussed with finite element method and ordered coupling method . maximum tensile stress criterion is chosen as the destroying criterion of components
首先建立了光学元件温升和结构分析模型，用有限元法和序贯耦合法计算材料的温升和变形，同时选取最大拉应力准则作为材料的破坏准则。 - When the fill factor is less than 1 , the concentrated tensile stress appeares near edge of disk surface , while the fill factor reaches up to 1 , the surface exhibites compressive stress , and the center is less tensile stress
当抽运光斑未充满激光介质时，介质的表面靠近边缘处会出现大的拉应力集中，并且介质表面的最大轴向位移和最大拉应力随光斑填充因子增大而增大；而当抽运光充满介质时，表面是压应力，较小的拉应力存在于介质内部。