×

曲轴转角 meaning in English

ca crank angle
crank angle

Examples

  1. Svc crank angle at suction valve close
    进气门关闭时的曲轴转角
  2. Csu crank angle selecting unit
    曲轴转角自动调节装置
  3. By the analysis of several gas forces in the twin - scroll compressor , the calculation formula of working volume and all different crank shaft angle are derived
    摘要分析了双头涡旋齿涡旋盘所受的各种气体力,提出了在任意曲轴转角下的各种气体力及工作腔容积的计算公式。
  4. Eight channels can sample tdc signals , crank angle signals and 4 cylinder pressure signals , two spare channels are reserved . the acquired data need to be analyzed and treated with some mathematic methods , and
    软件设定8个通道可以同时采集上止点信号、曲轴转角信号、 1至4气缸压力信号,留有两个备用通道。
  5. It is very difficult to analyze flame radiation in the cylinder of a diesel engine by theoretical method since flame radiation is a function of many parameters , such as the combustion process , the geometrical description of the chamber , the soot formation and oxidation processes , the soot radiant temperature and soot absorption coefficient . the radiant property of the flame in a cylinder is dependent on the combustion process . but the thermodynamic state of real engine cycles can be analyzed from the pressure - volume diagrams in the cylinder . thus a new thermodynamic computational model is set up for the flame radiation in the cylinder of a diesel engine based on the indirect relationship between the flame radiation and the pressure - volume diagram of the combustion process in this paper . the flame radiant heat flux in the cylinder of a di diesel engine is calculated with the variation of crank angle by this model . compared with measured values , the result of the computational values shows the model is available to represent the effects of flame radiation
    柴油机缸内的火焰辐射受诸多因素的影响,用理论分析法来确定它是相当困难的,由于柴油机缸内火焰辐射特性依赖于缸内的燃烧过程,而燃烧过程中的实际热力状态又可用示功图来分析,因此借助于火焰辐射与缸内热力参数之间的这种间接关系,建立了一种计算柴油机缸内火焰辐射传热的新模型,利用该模型对一台直喷柴油机缸内火焰辐射热流量随曲轴转角的变化情况进行了计算,将计算结果与实测结果进行了比较,表明该模型能较好预测缸内火焰辐射传热量。
More:   Next

Related Words

  1. 锐角转角
  2. 曲轴臂
  3. 曲轴减振器
  4. 曲轴轮
  5. 曲轴位置
  6. 曲轴制动器
  7. 曲轴磨床
  8. 双曲轴
  9. 曲轴机理
  10. 双拐曲轴
  11. 曲轴主轴颈磨床
  12. 曲轴转动装置
  13. 曲轴转角自动调节装置
  14. 曲轴转数
PC Version

Copyright © 2018 WordTech Co.