损耗模量 meaning in English
loss modulus
loss-modulus
Examples
- Standard test method for loss modulus conformance of dynamic mechanical analyzers
动态机械分析仪损耗模量一致性的标准试验方法 - Furthermore , the fatigue parameters of polyester fiber rein - forced asphalt concrete are decreased , which imply that the fatigue cracking resistance of asphalt concrete is improved
同时，聚酯纤维沥青混凝土的损耗模量降低，其抵抗疲劳开裂的能力增强。 - Time - temperature superposition principle could bee applied to g " dependence on cd , and the dependence of shifted factor at on temperature demonstrated a linear relationship by a plot of in at vs . t - 1 . the steady rheological measurements for nanocomposites melts were conducted . the results revealed that the melts of exfoliated nanocomposites with lower loading of org - mmt exhibited shear - thinning even at lower shear rate as compared with polymers filled with common particles , while the melts flow depended weakl
研究结果表明仁复合体系g ‘和动态损耗模量宁的对数关系性呀g ‘一109夕， _印维乖温动态模量满足时温叠加原理，频率移动因子( at )的对数与塌度的倒攀即种马与了一‘有良好的线性关系?一_面，复合体系熔体的稳态剪切流变行为具有不同于普通粒子填充聚合性。 - The results show that the dynamic elastic modulus , loss modulus and complex viscosity of the nanocomposite are higher than those of pp , while the loss factor is lower , that the complex viscosity of the nanocomposites is more sensitive to temperature , and that the flow activation energy and the crystallization temperature increase respectively by 15 % and 10k as compared with pp , which may contribute to the enhanced interfacial interaction between pp and ommt resulting from the addition of tmpp
结果表明：与纯聚丙烯相比，纳米复合材料具有较高的动态弹性模量、损耗模量和复合粘度，力学损耗因子则降低，纳米复合材料的复合粘度对温度的敏感性略高于聚丙烯；界面改性剂的加入增强了有机蒙脱土与聚丙烯的界面作用，与聚丙烯相比，纳米复合材料的流动活化能提高约15 % ，结晶峰温度提高10k左右。