承载板 meaning in English
bearing plate
loaded plate
loading plate
Examples
- Wood - based panels - performance specifications and requirements for load bearing boards for use in floors , walls and roofs ; german version en 12871 : 2001
木质板.用于地板墙壁和楼板的承载板性能规范和要求 - Under the conditions of dry , optimum moisture content or half of optimum moisture content and three kind diameter of loading boards , the main factors relative to modulus of resilience are also studied through the test of modulus of resilience
在干燥、最佳含水量、一半最佳含水量和三种不同直径大小承载板情况下做回弹模量试验，研究了影响回弹模量大小的主要因素。 - Fwd , benkelman beam and plate bearing tests were conducted on subgrade layer , subbase layer , base layer and surface layer of one selected pavement during construction in 1998 . correlations between defections measured by three different test devices have been established through deflections comparison and analysis
为了研究贝克曼梁、承载板和fwd三种弯沉检测设备在路面弯沉检测上的相关性，我们在选定的试验路段上进行了弯沉检测对比试验。 - After contrasting and analyzing the main design parameters " test methods of laboratory and field outside , it sets up the correlativities between the field bearing plate modulus and other parameters such as design dynamic modulus , benkleman bean static deflection , field cbr value , consistency and density . by means of laboratory experiment , it assays the influence of the consistency on laboratory bearing plate modulus and laboratory cbr values , and establishes the relationships between laboratory and field values . combined with the project , a more logical sub - grade quality test standard is put forward
通过对路基现场检测不同方法的对比分析，建立了设计动模量、贝克曼梁静弯沉、现场cbr 、稠度和压实度与现场承载板模量的关系；通过室内试验，分析了稠度对室内承载板、室内cbr的影响，并建立了室内外模量间的关系；在此基础上，结合工程实际，对不同检测方法进行了评价，提出了较为合理的路基施工质量检测标准。 - Dynamic modulus of layers is backcalulated by sidmod program with the deflection basin measured by fwd . static modulus is determined based on benkelman beam and plate bearing data . applicability of different devices in modulus calculation is summarized . the research results of this dissertation prorided the experimental and academic basis for the spread of fwd
用fwd测得的弯沉盆计算各结构层的动模量，用贝克曼梁和承载板测得的中心弯沉计算静模量，分析了不同设备与方法在进行模量反算时的适用性。