扭转变形 meaning in English
torsion deformation
torsional deflection
torsional deformation
Examples
- Constrained twisting deformation
约束扭转变形 - The model considers the torsional deformation of transmission axes , bending and longitudinal deformation of links , geometrical nonlinearity of guiding leaf springs , and the elastic nonlinearity of balance springs
该模型考虑了传动轴的扭转变形，连杆和导向板弹簧的弯曲和拉伸变形，导向板弹簧的几何非线性及平衡弹簧的非线性等因素的影响。 - The analysis indicates that the large variation of the object parameters , redundant force , deformation of the specimen and the disturbance caused by the frictional moment are four major factors affecting the degree of control accuracy
对系统的分析表明：被控对象参数的大范围变化、多余力、试件扭转变形对负载流量的干扰以及摩擦力矩干扰是影响控制精度的四个主要因素。 - The practical issue of drum brake with oversized overall stroke was resolved by experiments , and it indicates that major effect factors of air chamber overall stroke , which are the drum - shoe clearance , the elastic modulus of lining , the torsion deflection of cam shaft
研究结果表明，气室推杆总行程过大的主要影响因素为制动蹄与制动鼓之间的间隙、摩擦片的弹性模量、凸轮轴的扭转变形。 - The results of analysis show that : 1 ) doi of the pin - axis errors , especially the crank - pin - axis errors , is bigger than other axis errors ; 2 ) from the calculating results of doi of the errors of the different kinematic pairs , doi of rotate - completely pairs is bigger than that of oscillate pairs ; 3 ) the forced coupler - deformations resulted from the constraints out of motion plane consist of twisting and bending deformation , and the deformations are variat
( 4 )首次提出了运动副误差对平面连杆机构约束不确定性影响度的评判指标和单因素定量分析方法，得到了机构中不同运动副的不同平面内的误差对机构性能的影响程度。本文的分析计算结果表明，平面连杆机构中的非平面约束所造成的连杆强制变形中既有扭转变形又有弯曲变形。