成形件 meaning in English
drip moulding
formed part
shaped objects
Examples
- Necessary pressure tubes and steel beams may be either incorporated in the block or added later, depending on the design .
按设计要求，必要的压力导管和钢梁可以与成形件做在一起，也可以以后再加。 - Comparative study on the surface properties of sl and fdm parts
成形件表面性能的对比研究 - The microstructure of lsf components was made up of fine columnar dendrites , which grow epitaxially from the substrate , and the mean primary dendrite spacing was 26 . 58 m
对成形件微观组织的研究发现其组织主要由外延生长的细长枝晶组成，枝晶一次间距平均为26 . 58 m 。 - The primary research can be listed as follows . in this thesis , a control volume method was employed to model the microstructure of 3 - d braided performs produced by the four - step 1 1 square braiding process and their reinforced composite materials
主要的研究内容包括以下几个方面：系统地研究了采用四步法1 1方型编织工艺编织的预成形件及其增强的复合材料的细观结构。 - Examination of the density , strength , hardness and microstructure showed that the mechanical properties and structure of the part made by direct metal forming process are better than that obtained from selective laser sintering process , as good as or even better than castings
对成形件进行的密度、强度和硬度指标测试和金相组织观察表明：基于弧焊的直接金属成形件的组织结构和力学性能指标明显优于选择性激光烧结工艺成形件，达到或高于铸造零件。