底边缘 meaning in English
feather edge
sole edge inking machine
Examples
- Control that is anchored to the left , right , and bottom edges of the form , as the form is resized , the
控件锚定于窗体的左、右和底边缘，那么当调整该窗体的大小时，该 - ( when the width of the foundation is smaller , geosynthetics must be placed under the entire foundation ; when the width of the foundation is larger , geosynthetics may be placed for certain width at the edges of the foundation
(当基础宽度较小时，土工合成材料必须在基底全部铺设；当基础宽度较大时，土工合成材料可仅铺设在基底边缘一定宽度。 - In qinghai province , it reveals that the au deposits are mostly distributed on the sits between different tectonic units ; and in the edge of the exposed and / or concealed metamorphic basement of the early sinian period ; in the area of the exposed and concealed acid - instrusions and / or their contacts ; and in the localities where the circular and linear anomalies of graviation and magnetism cut across
结果表明，该区的金矿大都分布在不同大地构造单元结合部位；处于前震旦纪变质岩系出露及隐伏基底边缘；位于出露和隐伏中酸性岩体及其接触带；位于重磁环线、线线构造交汇处等。 - When the width of the foundation is smaller , the friction force is firstly increased from zero at the central area of the foundation , then decreased to zero at the edges of the foundation , hence there is a peak ; when the width of the foundation and the thickness of the soft ground is larger , the frication force is almost zero from the central area of the foundation to a certain distance , then increased , at last decreased to zero at the edges of the foundation , therefore there is a peak ; and when the width of the foundation is larger and the thickness of the soft ground is smaller , the friction force is firstly increased from zero at the central area of the foundation in the negative direction , then decreased to zero , so there is a negative peak , then increases in the positive direction , eventually decreased to zero at the edges of the foundation , hence there is a positive peak
当基础宽度较小时，从中心线为零处开始增加，达到峰值后，开始减小，直至基底边缘处为零；当基础宽度和软土地基厚度较大时，从中心线处开始，向外侧延伸一定距离，几乎为零，然后开始增加，达到峰值后，开始减小，直至基底边缘处为零；当基础宽度较大，并且软土地基厚度较小时，从中心线为零处开始反向增加，达到反向峰值后，然后反向减小，减小到零后，逐渐正向增加，达到峰值后，再逐渐减小，直至基底边缘处为零。