屈服极限 meaning in English
limit of yielding
minimum yield
off set limit
offset limit
yield limit
yield strength
yield value
yield-limit
Examples
- In two and three dimensions the yield limit is reached when a certain function of all the stress components reaches a fixed value .
在二维或三维的情况下，当所有应力分量的某个函数达到某一固定值时可达到屈服极限。 - The result of simulation indicated that the maximum of mises stress in all the key parts is less than the yield stress of the gun steel
计算结果表明，各关键部件的发射动应力均小于炮钢材料的屈服极限。 - Considering the feature of subgrade deformation , the off set limit and the settlement calculation depth are discussed in this paper
并结合路基变形特点，对软土层的屈服极限、沉降计算深度等问题进行了探讨。 - After pretension 0 . 1 strain and pretorsion to 14 , whereas the strength limit keep on increasing in company with the pretorsional capacity
其中屈服极限在预拉伸应变0 . 1后再预扭转14后达到最大值，而强度极限随着预扭转量的提高不断增大。 - The buckling of a plate mostly occurs in elastic regime with high strength steel adopted widely , and the plate reaches ultimate strength due to losing capacity when equivalent stress where maximal in - plane compressive stress appears arrives at yield in post - buckling phase
随着高强度钢的广泛应用，板格屈曲大部分发生在弹性范围内，在后屈曲阶段当板格最大面内压缩应力处的等效应力达到屈服极限时，板格迅速卸载，此时板格达到极限强度。