实测温度 meaning in English
measured temperature
observed temperature
Examples
- Then , the model of house is set up with system identification method after the model has been analyzed in theory
根据所建立的数学模型对阶跃响应的仿真结果和实测温度进行比较，从中可以选择所需精度的数学模型。 - By ansys , we can build temperature - calculating modes of p . c box girder t and then calculate the effect of temperature fields on the stress and the line deformation . 3 . adopt the spot - measure method
2 、用ansys建立预应力混凝土箱梁t构的温度计算模型，由实测温度给定边界条件，分别计算出温度对预应力混凝土箱梁t构挠度的影响以及对预应力混凝土箱梁截面应力的影响。 - As practical engineering examples the poper has shown the analyses oncrack control in two mass concrete structures by use of the procedure mentionedabove , in which the transient temperature fields were obtained from the results bythe finite difference method or the temperature curves measured in construction
作为实例，本文采用实测温度曲线求得瞬态温度场，按上述步骤对北京地区两个大厦基础进行了抗裂分析，结果与实际情况相符，未发现裂缝。 - The problem of monitoring the wear - line of a blast furnace is treated as the inverse problem of the static heat conduction system , and the latter has been turned into the optimization of the squared residual of the measured and calculated temperature at the sensor locations
摘要把确定高炉炉缸炉底热侵蚀边界归结为稳态热传导方程的反问题，并转化为极小化在若干测温点处由设定侵蚀边界对应的偏微分方程边值问题求得的温度与实测温度之间误差的优化问题。 - As practical engineering examples the paper has shown the analyses on crack control in two mass concrete structures by use of the procedure mentioned above , in which the transient temperature fields were obtained from the results by the finite difference method or the temperature curves measured in construction
作为实例，本文采用有限差分法及实测温度曲线求得瞬态温度场，按上述步骤对宁波地区两个大厦基础进行了抗裂分析，结果与实际情况相符，未发现裂缝。