×

变换层 meaning in English

transform layer

Examples

  1. The experiment results indicated that conditional on transforming layer 1mm thick and absorbing layer 2mm thick , the combined materials which were processed by 600 and 800 respectively have good absorbing performance , and the influence of the combing sequence on absorbing performance is indistinctive
    实验表明,当变换层为1mm ,吸收层为2mm时,以600处理的和800处理的材料进行不同组合都有较好的吸波性能。
  2. Based on experiment the materials with different content will obtain different absorbing performance . by the experiment , the paper obtained the laws for good absorbing performance . at the same time , the experiment optimized the preparation technology for the better performance
    为了应用目的,本文对不同产地原材料、不同含量对材料吸波性能的影响进行了研究,发现兰州产地原材料性能较好;高含量的吸收层和变换层组合才有优异的吸波性能。
  3. The combination absorbs microwave well with the least reflectivity of - 31 . 59db , and minimally having 2 . 31ghz - frequency band . these results illuminated the directional law of combined materials , it is that , when the double deck with the different thickness , no matter what is absorbing or transforming layers , its absorbing performance would not be influenced on the whole . when the double deck with the same thickness , the combining sequence of materials would cause crucial influence on its absorbing performance
    在8 . 2 12 . 4ghz频段内,最小反射率达- 45 . 93db ,有效频宽为4 . 0ghz ;当变换层和吸收层厚度相同,总厚度为2mm时,要获得较好的吸波性能,必须以高温处理的材料作变换层,低温处理的材料作吸收层,即存在材料组合的方向性,其中以1000分别与600 、 700处理的材料组合性能最佳,其最小反射率为- 31 . 59db ,有效频宽最小为2 . 31ghz 。
  4. About the combination of three layers , for the better absorbing performance , we need select the material treated by high temperatures of 1000 ? ^ 700 ? > 600 ? respectively . the combination with about 2mm thickness had better absorbing performance with the least reflectivity under the - 42db and almost coating the total width of 8 . 2 ~ 12 . 4ghz
    对于三层样品组合来说,以1000处理的材料作变换层, 600和700处理的材料作吸收层,总厚度在2mm以下,在8 . 2 12 . 4ghz范围内其最小反射率为- 42db ,有效频宽达到3 . 56ghz 。

Related Words

  1. 单位变换
  2. 变换运算
  3. 摇摆变换
  4. 解析变换
  5. 刻度变换
  6. 透视变换
  7. 异步变换
  8. 变换调制
  9. 映射变换
  10. 变换速度
  11. 变换参数
  12. 变换操作
  13. 变换常数
  14. 变换车道
PC Version

Copyright © 2018 WordTech Co.