初生纤维 meaning in English
as-formed fiber
as-spun fibre
nascent fiber
nascent fibre
Examples
- When draw down ratio was greater than 1 , the dope thread in the air gap was axially drawn with the rising of orientation degree so the fiber tenacity was strengthened
在喷头拉伸比大于1的情况下，原液细流在空气层中得到轴向拉伸，加大了初生纤维的取向度，所以纤维强度得到加强。 - The solution had good fluidity , spinnability , dynamic stability , and would never be demixing . the original camp fibers had better water absorbability when the spinning temperature was 80 and pressure was 0 . 4mpa
纺丝温度为80 ，纺丝压力为0 . 4mpa时，以丙酮为凝固剂，经湿法纺丝成形后，得到的camp初生纤维具有较好的吸水性能。 - Phbv will degrade at the processing temperature , which is much lower than its acute thermal degradation temperature . as the material for chemical fiber , phbv shows some special properties . when it was spun , the as - spun fiber was elastic and finally it would turn to be rigid
作为化学纤维的原料，此类材料的初生纤维在固体状态表现出的由弹性行为为主向塑性行为为主的转变直至最后表现为刚性体特征，直接影响着此类纤维的成形加工过程，成为其进一步发展的瓶颈障碍。 - The electrostatic spinning technique of producing nano - pan fiber felt was introduced . the relationship of processing parameters with diameter of fiber and the amount of remaining solvent in as - spun fiber were analyzed and the influence of compound solvent of dmf and acetone on properties of fiber was investigated
介绍了用静电纺丝法纺制纳米级聚丙烯腈纤维毡的方法，分析了纺丝工艺条件与纤维的直径及初生纤维的溶剂残留量的关系并探讨了采用二甲基甲酰胺及适量的丙酮为复合溶剂对纤维性能的影响。 - The adsorption of polymer chains at the sio2 surface avoided the coherence between the nascent hollow fibers , improved spinning conditions and hollow fiber bearing . the addition of ca further improved mechanical property of membrane , but pressure - resiposivity became weak . by controlling polymer and sio2
通过对sio _ 2填充pu溶液纺丝成形研究发现，因sio _ 2对pu纺丝液相分离条件的改变及对pu大分子的吸附，有效防止了pu初生纤维的粘结，提高了pu纺丝溶液的可纺性，改善了pu中空纤维膜的支撑性。