初始模量 meaning in English
initial modulus
Examples
- Dry initial modulus
干初始模量 - With the increased of pego percentage in blend films , the broken strength , the initial tensile modulus and the broken power decreased , but the elongation at break increased
随着pego的加入，共混膜的断裂强度和拉伸初始模量下降，断裂伸长率提高，断裂功减小。 - It is analyzed the influence of sericin aggregating state change caused by different soaking agents and treatment processes on the soft properties of silk in such aspects as initial modulus , breaking elongation and lubrication level variance
文章从初始模量、断裂伸长、润滑度变化等几个方面，分析了不同泡丝剂和不同处理工艺引起丝胶聚集状态改变对丝条柔软性能的影响。 - The tensile properties of aramid filament are examined by a tensile tester and verify the data by means of statistics . the results show that the tensile strength , initial modulus and elongation at rapture of the filaments reduce slightly with the time of treatment
测试了处理前后纤维的拉伸性能，并借助数理统计的方法对试验数据进行检验，结果表明，经等离子体处理后，芳纶纤维的拉伸强度、初始模量以及断裂伸长率都有所下降，但幅度不大。 - The test results show that the out - of - plane compressive property of 3d woven composite are rate sensitive . the elastic modulus is n ' t increased with the rising of strain - rate , however , the maximum compress stress and strain of 3d woven composite increase from 228mpa to 272mpa , from 15 % to 20 % as the strain rate increases from 2000 / s to 3000 / s
实验结果表明，三维机织玻璃纤维复合材料在面外力学性能上是应变率相关的，随着应变率的增大，冲击压缩初始模量基本不变，但最大应力和最大应变都明显增加。