×

再结晶的 meaning in English

blastic
recrystallized

Examples

  1. Effects of nb on the austenization and static recrystallization behavior of 20mnsi steel
    钢奥氏体化和静态再结晶的影响
  2. The semi - solid recrystallization velocity was run - up when the holding temperature risen and the heating velocity accelerated . 5
    保温温度升高和连续加热速度加诀都会使半固态再结晶的速度提高。
  3. This paper mainly describes workharden , moving regaining , and recrystallization of red copper in the process of hot deformation under different strain temperatures , different strain rates and different deformation degress
    摘要从不同的变形温度、变形速率、变形程度三个方面来研究紫铜在热变形过程中对产生的加工硬化、动恢复和动再结晶的影响。
  4. In view of the recrystallization problem of dz4 alloy directional coagulation turbine blade , experimental study revolving around the blade manufacture craft was performed , the recrystallization organization typical picture was obtained , therefore the recrystallization organization ' s distinction method was determined , and the forming condition of recrystallization organization was founded out , which has provided the basis for the control of recrystallization production
    摘要针对dz4合金定向凝固精铸涡轮叶片出现再结晶问题,围绕叶片制造工艺开展试验研究,制作了再结晶组织典型图片,确定了再结晶组织的鉴别方法,摸清了再结晶组织形成条件,为控制再结晶的产生提供了依据。
  5. And as the number of ecap passes increases , the rate at which softening occurs in the transition zone increases and the onset temperature of recrystallization drops . moreover , the grain size after static recrystallization is more finer , so grain size can be further refined by controlling the temperature and time of recrystallization
    Ecap道次越多,再结晶的温度越低,再结晶软化的速度越快,而且再结晶后的晶粒尺寸更为细小,因此可以通过控制再结晶的温度和时间进一步细化晶粒。

Related Words

  1. 再结晶
  2. 选择性再结晶 优先再结晶
  3. 再结晶层
  4. 优先再结晶
  5. 再结晶热处理
  6. 再结晶结
  7. 衰退再结晶
  8. 初级再结晶
  9. 反差再结晶
  10. 再结晶核
  11. 再结晶层
  12. 再结晶程度
  13. 再结晶阀值
  14. 再结晶钢
PC Version

Copyright © 2018 WordTech Co.