内水压力 meaning in English
internal water pressure
Examples
- The results show that the outside surrounding rock mass bears 20 % ~ 40 % load of the internal water pressure
结果表明：钢岔管外围围岩承担了20 % ~ 40 %的内水压力荷载。 - If lining combine with surrounding rock closely , it can be calculated together with rock pressure with coupling model
外水压力是和有压隧洞中内水压力相对而言的，作用对象为衬砌。 - The scale of the model is 1 against 10 . three kinds penstock model are made : slrcp , slsfrcp , slsfsrcp
同时，研制了新型的内水压力模拟方法，成功进行了压力管道的模型试验； 2 - The experimental method of the model test with 1 : 6 scale based on the work mechanism of bearing of steel y - pipe strengthened inside with crescent rib in combination with surrounding rock mass simulated by composite materials is adopted and the regularity of their participant capacity to bear inner water pressure is analyzed in this paper
摘要本文结合实际工程采用几何比尺为1 : 6的物理模型试验方法，用不同材料分层组合模拟围岩，对水电站内加强月牙肋钢岔管与围岩联合承载的工作机理、围岩分担内水压力的规律进行分析。 - 4 ) three - dimensional nonlinear analysis of the bottom outlet of the xiao wan arch dam is presented using sub - model techniques . the structural characteristics and failure mechanism of the bottom outlet , under loading of concrete deadweight , hydraulic pressure , internal water pressure and temperature are studied . it is shown that the meshing of the structure becomes easy and the computing time is reduced by using sub - modeling method
4 )对小湾拱坝的1 ~ #底孔进行了三维非线性分析，研究了孔口在坝体自重、库水压力、孔内水压力和库水温度影响等作用下的孔口应力分布、混凝土开裂、裂缝发展规律以及配筋对孔口开裂和裂缝扩展的影响。