ti-6al-4v meaning in English
钛棒
Examples
- Phase particle coarsening dynamics and pattern change in ti - 6al - 4v alloy
钛合金相颗粒粗化动力学及形貌变化 - Then the rp model is used as a positive mould to build up a silica gel negative mould , the negative mould is sent to the factory to manufacture ti - 6al - 4v alloy articular cartilage through ordinary mould - melted founding process
模具经抛光后，用硅胶翻模，最后浇注腊模，在西北有色金属研究院进行精密铸造，得到钛合金厂人工关节软骨。经后期抛光等处理，得到可用于临床的人工关节软骨。 - In this paper , the ceramic coatings were prepared in situ on ti - 6al - 4v alloy by micro - plasma oxidation ( mpo ) . the phase composition , microstructure and corrosion resistance of the ceramic coatings were studied in detail and the technology of corrosion resistant coatings was optimized . the dissolution of the substrate and the changes of the elements in the electrolyte during the mpo process were studied to discuss the growing characters and the structure of the ceramic coatings
本文通过微等离子体氧化( mpo )方法在ti - 6al - 4v钛合金表面原位生长陶瓷膜,系统地研究陶瓷膜的相组成、微观结构及膜层耐腐蚀性能,并优化耐蚀性陶瓷膜层制备工艺;分析基体在mpo过程中的溶解现象和电解液中离子浓度变化特点,探讨电极表面陶瓷膜层生长规律和结构特点;研究膜层的等效电路、膜层结构与耐腐蚀性能的关系,并对优化工艺条件下制备的陶瓷膜层进行进一步的耐腐蚀性能测试和耐腐蚀机制研究。