tension-torsion meaning in English
拉、扭剪
Examples
- Using newly developed filament - wound composite tubular specimens , the tension - torsion biaxial loading fatigue tests were performed
同时设计出一种缠绕复合材料管状试样，进行了拉扭双轴疲劳实验研究。 - It is not yet very known especially of the mechanical behaviour after secondary hardening such as torsion - tension - tension and tension - torsion - tension
特别是在扭转-拉伸-拉伸和拉伸-扭转-拉伸等二次硬化后的a3钢的力学性能还不甚了解。 - The mechanical behaviour of a3 steel specimen under monotonic tension , pure torsion , torsion - tension , tension - torsion , torsion - tension - tension , tension - torsion - tension were studied by standard cylinder specimen in this paper
本文研究了a3钢试件在单一拉伸、纯扭转时的力学性能；在拉伸-扭转、扭转-拉伸时的力学性能；在扭转-拉伸-拉伸、拉伸-扭转-拉伸时的力学性能。 - Comparing with these several strengthen formal , towards strength limit ' s improvement , the effect of torsion - tension and tension - torsion - tension was close ; simply tension - torsion - tension required a little larger prestrain quantity . whereas , towards yield limit " s improvement , the effect of torsion - tension - tension action ' s strengthen was the best
从几种硬化形式的比较来看，对于强度极限的提高，扭转-拉伸和拉伸-扭转-拉伸的强化效果相近，只是拉伸-扭转-拉伸所需的预应变量要大一些；而对于屈服极限的提高，扭转-拉伸-拉伸作用下的强化效果最佳。 - When the a3 steel specimen was operated by tension - torsion - tension action , both the yield limit and strength limit had very large improved compared with that of monotonic tension . the improve scope of the yield limit could be 109 . 36 % , the strength limit could be 56 . 26 % . the yield limit value reached the max
A3钢试件在拉伸-扭转-拉伸作用下的力学性能与单一拉伸相比，试件的屈服极限和强度极限都有很大提高。屈服极限提高幅度最高可达109 . 36 ，强度极限提高幅度最高可达56 . 26 。